[Identification]
    OptionType = NetAdapter

[PlatformsSupported]
    ISA
    EISA
    "Jazz-Internal Bus"

[Options]
    WL2420

[FileConstants]
UtilityInf      = "UTILITY.INF"
subroutineinf	= "SUBROUTN.INF"
SoftwareType	= "driver"
Exit_Code	= 0
NetEventDLL	= "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL	= "%SystemRoot%\System32\IoLogMsg.dll"
WL2420BYTE = 0x20246D68
Manufacturer    = "ZCOM"
ProductMajorVersion = "2"
ProductMinorVersion = "0"
ProductVersion	= $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "WL2420_"
ProductSoftwareTitle    = "WL2420 Adapter Driver"
ProductSoftwareImagePath = "\SystemRoot\System32\drivers\WL2420NT.sys"
NetRuleSoftwareType = "WL2420Sys ndisDriver WL2420Driver"
NetRuleSoftwareUse    = $(SoftwareType)
NetRuleSoftwareBindForm = """WL2420Sys"" yes no container"
NetRuleSoftwareClass    = {"WL2420Driver basic"}
NetRuleSoftwareSWBindable = {"WL2420Driver WL2420Adapter non exclusive 100"}
OptionHelpFile = "WLAHELP.hlp"
ProductHardwareName = "WL2420_"
ProductHardwareWL2420Title = "LANEscape WL2420 Network Adapter"
NetRuleHardwareWL2420Type  = "WL2420 WL2420Adapter"
NetRuleHardwareWL2420Class = {"WL2420Adapter basic"}
HelpWL2420Id = 20
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName  = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName	= $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"

[GeneralConstants]
from	    = ""
to	    = ""
ExitCodeOk     = 0
ExitCodeCancel = 1
ExitCodeFatal  = 2
KeyNull 	  = ""
MAXIMUM_ALLOWED   = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct    = ""
HardParameterKey = ""
TRUE		    = 1
FALSE		  = 0
NoTitle 	       = 0
ExitState   = "Active"
OldVersionExisted = $(FALSE)
DriverPath	  = $(!STF_NTPATH)\drivers
[date]
    Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
    read-syms Identification
    set Status	   = STATUS_SUCCESSFUL
    set Identifier = $(OptionType)
    set Media	     = #("Source Media Descriptions", 1, 1)
    Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
    set Status		= STATUS_FAILED
    set OptionList     = {}
    set OptionTextList = {}
    set LanguageList = ^(LanguagesSupported, 1)
    Ifcontains(i) $($0) in $(LanguageList)
	ifstr(i) $($1) == ""
	   goto returnoptions
	endif
	set PlatformList = ^(PlatformsSupported, 1)
	Ifcontains(i) $($1) in $(PlatformList)
	   goto returnoptions
	else
	   set Status = STATUS_NOTSUPPORTED
	   goto finish_ReturnOptions
	endif
    else
	set Status = STATUS_NOLANGUAGE
	goto finish_ReturnOptions
    endif
returnoptions = +
    set OptionList     = ^(Options, 1)
    set OptionTextList = ^(OptionsText$($0), 1)
    set Status		 = STATUS_SUCCESSFUL
finish_ReturnOptions = +
    Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
    set Option	 = $($1)
    set SrcDir	 = $($2)
    set AddCopy  = $($3)
    set DoCopy	 = $($4)
    set DoConfig = $($5)
    set LanguageList = ^(LanguagesSupported, 1)
    ifcontains(i) $($0) NOT-IN $(LanguageList)
        Return STATUS_NOLANGUAGE
    endif
    set-subst LF = "\n"
    read-syms GeneralConstants
    read-syms FileConstants
    set NetRuleSoftwareBindable = $($R1)
    read-syms DialogConstants$(!STF_LANGUAGE)
    ifstr(i) $(!NTN_Origination) == "NCPA"
    set Continue = "OK"
    endif
    read-syms FileConstants$(!STF_LANGUAGE)
    detect date
    set-title  $(Function$(Option)Title)
    set to   = Begin
    set from = Begin
    set CommonStatus = STATUS_SUCCESSFUL
    EndWait
Begin = +
    ifstr(i) $(!NTN_InstallMode) == deinstall
	set StartLabel = removeadapter
    else-ifstr(i) $(!NTN_InstallMode) == Update
	set StartLabel = UpgradeSoftware
    else-ifstr(i) $(!NTN_InstallMode) == bind
	set StartLabel = bindingadapter
    else-ifstr(i) $(!NTN_InstallMode) == configure
      ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
		 Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
         ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
         endif
		 set Error = $($R0)
		 set from = end
		 set to = end
         goto nonfatalinfo
	  else
		 set StartLabel = configureadapter
      endif
    else
	set StartLabel = installadapter
	set OEM_ABANDON_OPTIONS = {}
	set OEM_ABANDON_SOFTWARE = FALSE
	set OEM_ABANDON_ON = TRUE
    endif
    Set DLLPATH = $(SrcDir)
    set IRQValueIndex = 2
    set IoBaseAddrIndex = 7
    set ChannelValueIndex = 3
    set NetTypeValueIndex = 1
    set RTSValueIndex = 46
    Set ESSIDValue = "ANY"
    set from = $(fatal)
    set to = $(fatal)
    goto $(StartLabel)

installadapter = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    ifstr $(KeyProduct) != $(KeyNull)
        CloseRegKey $(KeyProduct)
        ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            goto end
        else
            set OldVersionExisted = $(TRUE)
        endif
    endif
    ifstr(i) $(DoCopy) == "YES"
        shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        else-ifstr(i) $($R0) == STATUS_FAILED
            shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            goto fatal
        else-ifstr(i) $($R0) == STATUS_USERCANCEL
            goto successful
        endif
        Set SrcDir = $($R1)
        install "Install-Hlp"
    endif
    goto installproduct

configureadapter = +
    Set DLLPATH = $(!STF_WINDOWSSYSPATH)\drivers
    ifstr(i) $(KeyProduct) == $(KeyNull)
        OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
        ifstr $(KeyProduct) == $(KeyNull)
            Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
            goto fatalregistry
        endif
    endif
    Shell $(UtilityInf) FindService, $(KeyProduct)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R0) != NO_ERROR
        goto fatalregistry
    endif
    set HardParameterKey    = $($R2)
    CloseRegKey $($R1)
    ifstr $(HardParameterKey) == $(KeyNull)
        set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
        goto fatalregistry
    endif
    set OldVersionExisted = $(TRUE)
    set ValueName = ""
    set ValueData = ""
    set ValueStr  = ""
    set ValueList = {}
    EnumRegValue $(HardParameterKey) ValueList

    ForListDo $(ValueList)
        set ValueItem = $($)
        set ValueName = *($(ValueItem),1)
        set ValueData = *($(ValueItem),4)
        ifstr(i) $(ValueName) == "InterruptNumber"
            set IRQValueIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "IoBaseAddress"
            set IoBaseAddrIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "DefaultChannel"
            set ChannelValueIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "NetworkTypeWLU"
            set NetTypeValueIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "RTSThreshold"
            set RTSValueIndex = $(ValueData)
        else-ifstr(i) $(ValueName) == "NetworkName"
            set ESSIDValue = $(ValueData)
        endif
    EndForListDo

    set IRQValue = *($(IRQList), ~($(IRQValues),$(IRQValueIndex)))
    ifstr(i) $(IRQValue) == ""
        set IRQValue = *($(IRQList), 2)
    endif

    set IoBaseAddrValue = *($(IoBaseAddrList), ~($(IoBaseAddrValues),$(IoBaseAddrIndex)))
    ifstr(i) $(IoBaseAddrValue) == ""
        set IoBaseAddrValue = *($(IoBaseAddrList), 7)
    endif

    set ChannelValue = *($(ChannelList), ~($(ChannelValues),$(ChannelValueIndex)))
    ifstr(i) $(ChannelValue) == ""
        set ChannelValue = *($(ChannelList), 3)
    endif

    set NetTypeValue = *($(NetTypeList), ~($(NetTypeValues),$(NetTypeValueIndex)))
    ifstr(i) $(NetTypeValue) == ""
        set NetTypeValue = *($(NetTypeList), 1)
    endif

    set RTSValue = *($(RTSList), ~($(RTSValues),$(RTSValueIndex)))
    ifstr(i) $(RTSValue) == ""
        set RTSValue = *($(RTSList), 46)
    endif

    ifstr(i) $(ESSIDValue) == ""
        Set ESSIDValue = "ANY"
    endif

adapteroptions = +
    set from = adapteroptions
    loadlibrary "Install Diskette" $(DLLPATH)\wladlg.dll DllHandle
    read-syms FileDependentDlg$(!STF_LANGUAGE)
    SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
    EndWait
    ui start "InputDlg" $(DllHandle)
    StartWait
    ifstr(i) $(DLGEVENT) == "CONTINUE"
        set IRQValueIndex = $(Combo1Out)
        set IoBaseAddrIndex = $(Combo2Out)
        set ChannelValueIndex = $(Combo3Out)
        set NetTypeValueIndex = $(Combo4Out)
        set RTSValueIndex = $(Combo5Out)
        set ESSIDValue = *($(EditTextOut),1)
        ui pop 1
    else-ifstr(i) $(DLGEVENT) == "EXIT"
        set CommonStatus = STATUS_USERCANCEL
        ui pop 1
        FreeLibrary $(DllHandle)
        goto end
    else
        ui pop 1
        FreeLibrary $(DllHandle)
        goto end
    endif
    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
    set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
    set ChannelValue = *($(ChannelValues), ~($(ChannelList),$(ChannelValueIndex)))
    set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeValueIndex)))
    set RTSValue = *($(RTSValues), ~($(RTSList),$(RTSValueIndex)))
    ifstr(i) $(!NTN_InstallMode) == configure
       goto updateparameters
    endif

installproduct =+
    StartWait

;    Shell $(UtilityInf), EISAFindBus, $(WL2420BYTE)
;    ifint $($ShellCode) != $(!SHELL_CODE_OK)
;        goto ShellCodeError
;    endif
;    ifstr $($R0) != "NO_ERROR"
;        set Error = $($R0)
;        goto fatal
;    endif
;    ifstr(i) $($R1) == {}
;        set Error = $(CANNOT_FIND_ANY_CARD)
;        set CommonStatus = STATUS_USERCANCEL
;        set from = "end"
;        goto nonfatal
;    endif
;    set AdapterList = $($R1)

    ifint $(OldVersionExisted) == $(FALSE)
        ifstr(i) $(DoCopy) == "YES"
            Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            else-ifstr(i) $($R0) == STATUS_FAILED
                Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
                ifint $($ShellCode) != $(!SHELL_CODE_OK)
                    goto ShellCodeError
                endif
                set Error = $($R0)
                goto fatal
            else-ifstr(i) $($R0) == STATUS_USERCANCEL
                goto successful
            endif
            Set SrcDir = $($R1)
        endif
        install "Install-Option"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set Error = $($R0)
            goto fatal
        endif
    endif

    ;
    ; Check to see if the product Software key exists already in the system
    ; service keys before we try to add the software component.
    ;
    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ProductHardwareName) $(!REG_KEY_READ) KeyNt
    CloseRegKey $(KeyNt)

    ifstr(i) $(KeyNt) == ""
        Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), +
            $(ProductSoftwareName), +
            $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
            $(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
            $(NetEventDLL)
        Set OEM_ABANDON_SOFTWARE = TRUE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $($R1)
            CloseRegKey $($R2)
            CloseRegKey $($R3)
            CloseRegKey $($R4)
            CloseRegKey $($R5)
            goto fatalregistry
        endif
        Set SoftProductKey    = $($R1)
        Set SoftNetRuleKey    = $($R2)
        Set SoftServiceKey    = $($R3)
        Set SoftParameterKey  = $($R4)
        Set SoftLinkageKey    = $($R5)
        set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
                {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
                {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
                {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
                {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
                {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
                {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
        Shell  $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            CloseRegKey $(SoftProductKey)
            CloseRegKey $(SoftNetRuleKey)
            CloseRegKey $(SoftServiceKey)
            CloseRegKey $(SoftParameterKey)
            CloseRegKey $(SoftLinkageKey)
            goto fatalregistry
        endif
        set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
                    {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
                    {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
        Shell  $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        CloseRegKey $(SoftProductKey)
        CloseRegKey $(SoftNetRuleKey)
        CloseRegKey $(SoftServiceKey)
        CloseRegKey $(SoftParameterKey)
        CloseRegKey $(SoftLinkageKey)
        ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
            EndWait
            goto fatalregistry
        endif
    endif

;    ForListDo $(AdapterList)
;        set BusNum = *($($),1)
;        set SlotNum = *($($),2)
;        Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
;            $(SlotNum), $(ProductHardware$(Option)Description), $(ProductHardwareName) "YES"
;        ifint $($ShellCode) != $(!SHELL_CODE_OK)
;            goto ShellCodeError
;        endif
;        ifstr $($R0) != "NO_ERROR"
;            set Error = $($R0)
;            goto fatal
;        endif
;        ifstr(i) $($R1) != "YES"

            Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
            ifint $($R4) != -1
                Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
            endif
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif
            set RegistryErrorIndex = $($R0)
            ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
                EndWait
                CloseRegKey $($R1)
                CloseRegKey $($R2)
                CloseRegKey $($R3)
                goto fatalregistry
            endif

            set IRQValue = *($(IRQList),2)
            set IoBaseAddrValue = *($(IoBaseAddrList),7)
            set ChannelValue = *($(ChannelList),3)
            set NetTypeValue = *($(NetTypeList),1)
            set RTSValue = *($(RTSList),46)
            loadlibrary "Install Diskette" $(DLLPATH)\wladlg.dll DllHandle
            read-syms FileDependentDlg$(!STF_LANGUAGE)
            SetHelpFile $(!STF_WINDOWSSYSPATH)"\"$(OptionHelpFile) $(MinHelpId) $(MaxHelpId) $(Help$(Option)Id)
            EndWait
            ui start "InputDlg" $(DllHandle)
            StartWait
            ifstr(i) $(DLGEVENT) == "CONTINUE"
                set IRQValueIndex = $(Combo1Out)
                set IoBaseAddrIndex = $(Combo2Out)
                set ChannelValueIndex = $(Combo3Out)
                set NetTypeValueIndex = $(Combo4Out)
                set RTSValueIndex = $(Combo5Out)
                set ESSIDValue = *($(EditTextOut),1)
                ui pop 1
            else-ifstr(i) $(DLGEVENT) == "EXIT"
                set CommonStatus = STATUS_USERCANCEL
                ui pop 1
                FreeLibrary $(DllHandle)
                goto setfailed
            else
                ui pop 1
                FreeLibrary $(DllHandle)
                goto setfailed
            endif
            set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
            set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
            set ChannelValue = *($(ChannelValues), ~($(ChannelList),$(ChannelValueIndex)))
            set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeValueIndex)))
            set RTSValue = *($(RTSValues), ~($(RTSList),$(RTSValueIndex)))
            Set HardNetCardKey      = $($R1)
            Set HardNetRuleKey      = $($R2)
            Set HardParameterKey    = $($R3)
            set AdapterNumber       = $($R4)
            set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
                    {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)Title)},+
                    {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
                    {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
                    {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
                    {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
             goto ShellCodeError
            endif

            set NewValueList = {{BusNumber,$(NoTitle),$(!REG_VT_DWORD),0},+
                               {BusType,$(NoTitle),$(!REG_VT_DWORD),1},+
                               {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
                               {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                               {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddrValue)},+
                               {DefaultChannel,$(NoTitle),$(!REG_VT_DWORD),$(ChannelValue)},+
                               {NetworkTypeWLU,$(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
                               {RTSThreshold,$(NoTitle),$(!REG_VT_DWORD),$(RTSValue)},+
                               {NetworkName,$(NoTitle),$(!REG_VT_SZ),$(ESSIDValue)}}
            Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
            ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
                        Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
            endif
            CloseRegKey $(HardParameterKey)

            set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
            set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
            set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
                    {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
                    {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
                    {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
            Shell  $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif

            Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)

            CloseRegKey $(HardNetCardKey)
            CloseRegKey $(HardNetRuleKey)
            CloseRegKey $(HardParameterKey)
            ifint $($ShellCode) != $(!SHELL_CODE_OK)
                goto ShellCodeError
            endif


;        endif
;    EndForListDo
    goto successful
updateparameters =+
    set IRQValue = *($(IRQValues), ~($(IRQList),$(IRQValueIndex)))
    set IoBaseAddrValue = *($(IoBaseAddrValues), ~($(IoBaseAddrList),$(IoBaseAddrIndex)))
    set ChannelValue = *($(ChannelValues), ~($(ChannelList),$(ChannelValueIndex)))
    set NetTypeValue = *($(NetTypeValues), ~($(NetTypeList),$(NetTypeValueIndex)))
    set RTSValue = *($(RTSValues), ~($(RTSList),$(RTSValueIndex)))
    set NewValueList = {{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(IRQValue)},+
                        {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IoBaseAddrValue)},+
                        {DefaultChannel,$(NoTitle),$(!REG_VT_DWORD),$(ChannelValue)},+
                        {NetworkTypeWLU,$(NoTitle),$(!REG_VT_DWORD),$(NetTypeValue)},+
                        {RTSThreshold,$(NoTitle),$(!REG_VT_DWORD),$(RTSValue)},+
                        {NetworkName,$(NoTitle),$(!REG_VT_SZ),$(ESSIDValue)}}
    Shell  $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
    ifstr(i) $(!STF_GUI_UNATTENDED) == "YES"
                Shell $(UtilityInf),AddDefaultNetCardParameters,$(HardParameterKey)
    endif
    CloseRegKey $(HardParameterKey)
    goto successful
bindingadapter =+
    set Error = "Binding: Sorry, not yet implemented."
    goto fatal
removeadapter = +
    ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    else
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $(!NTN_RegBase)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
UpgradeSoftware = +
    OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
    ifstr $(KeyProduct) != $(KeyNull)
        Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            Debug-Output "ShellCode error"
            goto ShellCodeError
        endif
        set !UG_Filename = $($R0)
        install "Install-Update"
        ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
            goto fatal
        endif
        SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
        SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
        CloseRegKey $(KeyProduct)
    else
        goto fatalregistry
    endif
    goto end
successful = +
    EndWait
    FreeLibrary $(DllHandle)
    goto end
abandon = +
    ForListDo $(OEM_ABANDON_OPTIONS)
        Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), $($)
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    EndForListDo
    ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
        Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
            $(ProductSoftwareName), FALSE
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set RegistryErrorIndex = $($R0)
        ifstr(i) $(RegistryErrorIndex) != NO_ERROR
            goto fatalregistry
        endif
    endif
    goto end
warning = +
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(to)
    else-ifstr(i) $($R1) == "CANCEL"
        goto $(from)
    else
        goto "end"
    endif
nonfatalinfo = +
    Set CommonStatus = STATUS_USERCANCEL
    Set Severity = STATUS
    goto nonfatalmsg
nonfatal = +
    Set Severity = NONFATAL
    goto nonfatalmsg
nonfatalmsg = +
    ifstr(i) $(Error) == ""
        Set Severity = NONFATAL
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    ifstr(i) $($R1) == "OK"
        goto $(from)
    else
        goto "end"
    endif
fatalregistry = +
    Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    set Error = $($R0)
    goto fatal
fatal = +
    ifstr(i) $(Error) == ""
        Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
        ifint $($ShellCode) != $(!SHELL_CODE_OK)
            goto ShellCodeError
        endif
        set Error = $($R0)
    endif
    Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
    ifint $($ShellCode) != $(!SHELL_CODE_OK)
        goto ShellCodeError
    endif
    goto setfailed
ShellCodeError = +
    set DlgType        = "MessageBox"
    set STF_MB_TITLE = $(ShellCodeErrorTitle)
    set STF_MB_TEXT  = $(ShellCodeErrorText)
    set STF_MB_TYPE  = 1
    set STF_MB_ICON  = 3
    set STF_MB_DEF   = 1
    ui start "Error Message"
    goto setfailed
setfailed = +
    set CommonStatus = STATUS_FAILED
    ifstr(i) $(OEM_ABANDON_ON) == TRUE
        set OEM_ABANDON_ON = FALSE
        goto abandon
    endif
    goto end
end = +
    goto term
term = +
    Return $(CommonStatus)

[Install-Option]
    set STF_VITAL = ""
    ifstr(i) $(AddCopy) == "YES"
        AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    endif
    ifstr(i) $(DoCopy) == "YES"
        set !STF_NCPA_FLUSH_COPYLIST = TRUE
        CopyFilesInCopyList
    endif
    Exit
[Install-Hlp]
    set STF_VITAL = ""
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    Exit
[Install-Update]
    set STF_VITAL	   = ""
    set STF_OVERWRITE	 = "VERIFYSOURCEOLDER"
    AddSectionFilesToCopyList Files-Hlp $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
    AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
    set !STF_NCPA_FLUSH_COPYLIST = TRUE
    CopyFilesInCopyList
    exit

[Source Media Descriptions]
    1  = "WL2420 NDIS3 Driver"

[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386

[Files-Inf]
1,    oemsetup.inf,    SIZE=99999,     RENAME=$(!UG_Filename)
[Files-WL2420]
1,WL2420NT.sys , SIZE=9999
1,WLADLG.DLL , SIZE=9999
[Files-Hlp]
1,WLAHELP.hlp , SIZE=9999

[LanguagesSupported]
    ENG

[OptionsTextENG]
    WL2420  = "ZCOM WL2420 ISA Wireless Network Adapter"

[FileConstantsENG]
ProCaption   = "Windows NT Setup"
ProCancel    = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed.  "+
		 "Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1     = "Copying:"
ProText2     = "To:"

ProductSoftwareDescription = "LANEscape/WL2420 PnP ISA Adapter"

FunctionWL2420Title = "LANEscape/WL2420 Network Adapter Setup"
ProductHardwareWL2420Description = "LANEscape/WL2420 PnP ISA Adapter"

IRQList  = ^(IRQChoices, 1)
IRQValues = ^(IRQChoices, 2)
IoBaseAddrList = ^(IoBaseAddrChoices, 1)
IoBaseAddrValues = ^(IoBaseAddrChoices, 2)
ChannelList = ^(ChannelChoices, 1)
ChannelValues = ^(ChannelChoices, 2)
NetTypeList = ^(NetTypeChoices, 1)
NetTypeValues = ^(NetTypeChoices, 2)
RTSList = ^(RTSChoices, 1)
RTSValues = ^(RTSChoices, 2)

[DialogConstantsENG]
Help	      = "&Help"
Exit	      = "Cancel"
OK	      = "OK"
HelpContext = ""
Continue    = "Continue"
Cancel	      = "Cancel"

[FileDependentDlgENG]
Label1 = "&IRQ Level:"
Label2 = "I/O &Port Address:"
DlgType = "RadioCombination"
DlgTemplate = "WLA"
Caption = $(Function$(Option)Title)
Combo1List = $(IRQList)
Combo1Out  = $(IRQValue)
Combo2List = $(IoBaseAddrList)
Combo2Out  = $(IoBaseAddrValue)
Combo3List = $(ChannelList)
Combo3Out  = $(ChannelValue)
Combo4List = $(NetTypeList)
Combo4Out  = $(NetTypeValue)
Combo5List = $(RTSList)
Combo5Out  = $(RTSValue)
ComboListItemsIn  = {Combo1List, Combo2List, Combo3List, Combo4List, Combo5List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out, Combo4Out, Combo5Out}
EditTextLim  = {32}
EditTextIn   = {$(ESSIDValue)}
EditTextOut  = {$(ESSIDValue)}
EditFocusOn  = ""
CBOptionsGreyed = {}
NotifyFields = {NO, NO}
MinHelpId = 10
MaxHelpId = 1140
HelpContext = $(Help$(Option)Id)


[IRQChoices]
IRQ_1 = "10",10
IRQ_2 = "11",11
IRQ_3 = "12",12

[IoBaseAddrChoices]
IoBase_1  = "0x100",256
IoBase_2  = "0x140",320
IoBase_3  = "0x180",384
IoBase_4  = "0x1C0",448
IoBase_5  = "0x200",512
IoBase_6  = "0x240",576
IoBase_7  = "0x280",640
IoBase_8  = "0x2C0",704
IoBase_9  = "0x300",768
IoBase_10  = "0x340",832
IoBase_11  = "0x380",896
IoBase_12  = "0x3C0",960
IoBase_13  = "0x400",1024
IoBase_14  = "0x440",1088
IoBase_15  = "0x480",1152
IoBase_16  = "0x4C0",1216
IoBase_17  = "0x500",1280
IoBase_18  = "0x540",1344
IoBase_19  = "0x580",1408
IoBase_20  = "0x5C0",1472
IoBase_21  = "0x600",1536

[ChannelChoices]
CH_1 = "Channel 1",1
CH_2 = "Channel 2",2
CH_3 = "Channel 3",3
CH_4 = "Channel 4",4
CH_5 = "Channel 5",5
CH_6 = "Channel 6",6
CH_7 = "Channel 7",7
CH_8 = "Channel 8",8
CH_9 = "Channel 9",9
CH_10 = "Channel 10",10
CH_11 = "Channel 11",11
CH_12 = "Channel 12",12
CH_13 = "Channel 13",13
CH_14 = "Channel 14",14

[NetTypeChoices]
NetT_0 = "Infrastructure",0
NetT_1 = "Ad-Hoc",1

[RTSChoices]
RTS_0  = "50" ,50
RTS_1  = "100" ,100
RTS_2  = "150" ,150
RTS_3  = "200" ,200
RTS_4  = "250" ,250
RTS_5  = "300" ,300
RTS_6  = "350" ,350
RTS_7  = "400" ,400
RTS_8  = "450" ,450
RTS_9  = "500" ,500
RTS_10 = "550" ,550
RTS_11 = "600" ,600
RTS_12 = "650" ,650
RTS_13 = "700" ,700
RTS_14 = "750" ,750
RTS_15 = "800" ,800
RTS_16 = "850" ,850
RTS_17 = "900" ,900
RTS_18 = "950" ,950
RTS_19 = "1000",1000
RTS_20 = "1050",1050
RTS_21 = "1100",1100
RTS_22 = "1150",1150
RTS_23 = "1200",1200
RTS_24 = "1250",1250
RTS_25 = "1300",1300
RTS_26 = "1350",1350
RTS_27 = "1400",1400
RTS_28 = "1450",1450
RTS_29 = "1500",1500
RTS_30 = "1550",1550
RTS_31 = "1600",1600
RTS_32 = "1650",1650
RTS_33 = "1700",1700
RTS_34 = "1750",1750
RTS_35 = "1800",1800
RTS_36 = "1850",1850
RTS_37 = "1900",1900
RTS_38 = "1950",1950
RTS_39 = "2000",2000
RTS_40 = "2050",2050
RTS_41 = "2100",2100
RTS_42 = "2150",2150
RTS_43 = "2200",2200
RTS_44 = "2250",2250
RTS_45 = "2300",2300